impact wrench with a 1/2 "square socket mounted with a ring and a pin or a securing spring on the mounting spindle, with a dedicated rubber cover on the body to protect against damage,
the cap is blocked by a pin located in the pin,
equipped with a brushless motor with high power output with a torque of up to 812 Nm, breaking torque is 1084 Nm,
brushless motor thanks to lower friction has lower energy losses - it can work longer on one battery charge and is characterized by a much longer life,
The DCF891 key offers 4 modes of operation, and the force is regulated by means of the trigger:
"screw symbol" is the mode of precise tightening / loosening of screws, the wrench tightens at maximum speed until it meets resistance, stops for a short while and starts tightening sequentially (a few strokes / break) for better control of the tightening force; when unscrewing, the key works with all its strength until unscrewing, and after loosening it reduces the rotation to prevent uncontrolled dropping of the nut / bolt,
"1" is the first gear in which the key tightens at a low speed up to 600 rpm (136Nm), unscrews at full speed 2000 rpm,
"2" is the second gear, in which the key tightens at an average speed of up to 1200 rpm (406Nm), unscrews the full speed of 2000 rpm,
"3" is the third gear, where the key tightens at high speed up to 2000 rpm (812Nm), unscrews the full speed 2000 rpm,
strong LED diode in the foot with dimming function ensures very good visibility of the working area,
has a rubberized, non-slip handle,
a special hook allows you to attach the key to the belt,
the DCF891 impact wrench replaces the DCF894H model,
impact wrench supplied with 2 batteries and a charger,
TECHNICAL DATA FOR THE DEWALT IMPACT WRENCH [DCF891]:
supply voltage: 18V XR,
battery type: Li-Ion,
mounting type: square 1/2 "
max. idle speed: 0 - 2000 rpm,
idle speed 1: 0-600 rpm,
idle speed 2: 0-1200 rpm,
idle speed 3: 0-2000 rpm,
max. Idle Impact Rate: 0 - 3250 bpm:
1 idle percussion rate: 0 - 975 bpm
2nd idle percussion rate: 0 - 1950 bpm
impulse rate at idle 3: 0 - 3250 bpm
maximum torque: 812 Nm:
torque in 1st gear: 136 Nm,
torque in 1st gear: 405 Nm,
torque in 1st gear: 812 Nm,
breaking torque: 1084 Nm,
total length with the head: 175 mm.
weight (EPTA): 1.67 kg
EQUIPMENT FOR DEWALT IMPACT WRENCH [DCF891P2G-XJ]:
2 Li-Ion 5.0Ah batteries,
1 multi-voltage charger,
rubber cover,
belt clip,
storage foam
user manual.